4.07 2009/06/01 
----------------
This update solves some problems with 4.06 and should be installed on all
devices currently running 4.06. Devices running 4.04 do not need to be upgraded
(see previous release notes).

FIX: Tasks declaration fails
FIX: Occasionial crashes


 4.06 09/03/25 
---------------
This update is only significant for:
  - Flarm04 users who wish to reactivate flight recording
  - users who leave the SD card in the device at all times and observe strange and missing logs

FIX: flight logs on SD card could be corrupted or deleted when the SD card was always inserted
ADD: re-enabled flight recording for Flarm04 devices
ADD: support for LXN IGC devices


 4.04 08/06/17 
---------------
This update is only significant for:
  - users who use flight record downloading onto SD card
  - users of devices manufactured by LX navigation who need to configure the baud rate on the dataport
  - users who experienced intermittent GPS failure (please also verify antenna installation)

FIX: Improved GPS fix reliability on devices with substandard GPS antenna placement. This bug was introduced with the V4.0 release.
FIX: Some log records would be written incompletely to the SD card. Only the most current record was affected.
ADD: Accidental downgrading of firmware with SD card is no longer possible
ADD: Serial port baudrate can be configured on LX devices 
ADD: Baud rate and ICAO ID can be set through SD card configuration file


 4.03 08/05/15 
---------------
This update is only significant for:
  - users of newer LX FLARM (Red Box, LX Mini Box)
  - users who experience problems flight download onto SD card 

FIX: More reliable GPS configuration for some LX products (Red Box, LX Mini Box)
FIX: Flight records would not be copied to the SD card on a few devices. Only non-IGC devices were affected.
ADD: Incorrect commands in SD card configuration files will cause an 0xA1 error report upon startup
FIX: Version number in red/green on startup of original FLARM devices with round display type
FIX: $PFLAC,R,UI now returns correct value


 4.02 08/04/15 
---------------
Internal release for production only


 4.01 08/03/28 
---------------
This update is only significant for users of "Stealth Mode" (we generally do NOT recommend the use of "Stealth Mode")
FIX: for users of "Stealth Mode"; when Stealth Mode was activated this was not visible for the first two minutes after powerup , reset or setting it
FlarmTool: changed labels of buttons in "Settings" dialog to match release notes and manuals


 4.00 08/03/05 
---------------
Initial release 4.00